Ziroli Plans offers a full line of Giant scale warbird and civilian airplane plans, components, and accessories.
  • 30 days returns
     
  • Shipping Worldwide
    See all conditions
  • (631) 467-4765
    Call us Monday - Friday
Cart is empty

Sterner Facet 2300 Plan

Only 1000 left

55 $55.00

Product ID: STER:FAC2300P

  • Wingspan: 90"
  • Wing Aera 1210 sq"
  • Wing Loading(Dry) 41oz./sq ft.
  • Overall Length 70"
  • Ramp Weight (Dry) 18-20 lbs
  • Fuel Capacity  118oz
  • Radio 5 channels min
  • Turbine Power Req'd..……17 to 23# Turbine

 

The FACET series Sport Jet was designed as an easy, quick build, inexpensive wood airframe for primary use on short, grass field operations.

This design incorporates a Foam Core wing and an all wood fuselage.

 All expensive items such as F/G Inlets, Tailpipes, Retracts etc. have been eliminate in this design.

 The FACET airframe can be assembled in as little as 2 weekends by any average builder.

On of the most desired features of the FACET is that all the Turbine electronics and fuel delivery components are mounted on a single removable tray, greatly simplifying the Turbine installation.

Qty:

The Facet 2300 plan set clearly illustrate all structure as well as showing installation of landing gear. The Facet 2300 plan shows the installation of  servos and Turbine engine and features removable wing panels.  The basic structures use conventional “modeling” tools and materials such as balsa and plywood, foam and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com  forums for Kerry Sterner's plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon - Fri EST 631-467-4765. The plan includes full-size templates for all the required parts allowing you to cut a complete “kit” before you start construction. If you would like to purchase a wood kit see KIT CUTTER'S on selection bar at the top of each page. The plans have instruction guide  and notes on the plans. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with iron on covering. Nick Ziroli Plans has building accessories available for the Facet 2300.

Plans Specifications:
  • Specifications: Facet 2300
  • Length: 70"
  • Weight: 18-20lbs
  • Wing span: 90"
  • Wing incidence at root: 0 degrees 
  • Stab incidence: +0 degree
  • Turbine Power Req'd..……17 to 23# Turbine
  • Aileron throws: 3/8" up and down  D/R@80%
  • Elevator throws: 3/4" up and down D/R@75%
  • Rudder throws:  1" to right & left
  • Flaps 50% Down Flap=15-20 degree,100% Dowm Flap = 35 Degrees
  • Engine offset degrees: 0 right 0 up
  • CG Location: 1" from rear face of bulkhead F-6 with no fuel onboard(see plan)
  • Requires
  • Nose Gear Asm
  • Formed Aluminum landing gear
  • Power: SIMJET-1700, 2300
  • Fuel tank::2 x 24oz Dubro#424 fuel tanks 
  • Fuel Tank  64oz custom fuel cell
  • Wheels Main: 3 1/5" Diameter
  • Wheels Nose 3" Diameter
  • Radio channels: 5 or more
  • Servos:  Ailerons (2)150+oz DMGBB, Elevators (1)150+oz DMGBB, Rudder (1)90+oz DMGBB, Flaps (2)125+oz DMGBB , Steering(1) 150oz DMGBB
           DMG-Digital metal gear BB-ball bearing