Ziroli Plans offers a full line of Giant scale warbird and civilian airplane plans, components, and accessories.
  • 30 days returns
     
  • Shipping Worldwide
    See all conditions
  • (631) 467-4765
    Call us Monday - Friday
Cart is empty

P-40 Warhawk Plan

Only 1000 left

60 $60.00

Product ID: ZIR:P401

  • Scale: 2.5" - 1'
  • Wingspan: 94"
  • Length: 77"
  • Wing Area: 1525 sq/in
  • Weight: 28-34lbs
  • Power: 62-85cc gas

The Curtiss P-40 Warhawk was widely used in the China-Burma theatre, most notably with the "Flying Tigers" of the American Volunteer Group (AVG) led by Gen. Glair Chennault. The detailed plan set consists of four large sheets which clearly illustrate all structure as well as shooing flap and retract installation.

Qty:

The giant scale P-40 Warhawk plan set is 1/4.8 scale and consists of five large sheets that clearly illustrate all structure as well as showing installation of flaps and retracts. The P-40 Warhawk plan shows the installation of Robart retracts, fixed wire gear, servos and Quadra 35 engine and features one piece wing.  The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com  forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon - Fri EST 631-467-4765. The plan includes full-size templates for all the required parts allowing you to cut a complete “kit” before you start construction. If you don’t have the tools or time to cut your own kit Nick Ziroli Plans now carries laser cut wood kits for the P-40 Warhawk plan. If you choose gear or an engine not shown on the plans you should have them on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with 1 oz fiberglass cloth and ZAP Z-poxy finishing resin and elevator and rudder with iron on cloth covering such as Solartex. Nick Ziroli Plans has building and scale accessories available for the P-40 Warhawk. 

Plans Specifications:
  • Specifications: P-40 Warhawk
  • Scale: 1/4.8
  • Inches to the foot: 2.5" - 1'
  • Length: 77"
  • Weight: 28-34lbs
  • Wing loading: 42-52 oz/sqft"
  • Wing span: 94"
  • Wing incidence at root: +1.5 degrees
  • Stab incidence: 0 degree
  • Dihedral: 4 1/8" under WII
  • Power: 62-85cc gas
  • Aileron throws: 1.5" up and 3/4" down
  • Elevator throws: 1.25" up and 1.25" down
  • Washout at wing tip: 2 to 3 degrees built in with jig
  • Aileron throws: 3/4" up and 1/2" down
  • Elevator throws: 3/4" up and 3/4" down
  • Rudder throws: 2" to right & 2" to left
  • Flaps 50 degrees down
  • Cowl length: 19"
  • Cowl height front: 12"
  • Cowl height rear: 12.75"
  • Cowl width front:: 7.5"
  • Cowl width rear: 8.75"
  • Engine offset degrees: 2 right, 2 down
  • CG Location: 4 1/4" back from leading edge of the wing at the fuselage with the gear down
  • Requires:
  • Ziroli cowl
  • Ziroli canopy
  • Engine: 62-85cc gas
  • Spinner: 6.5" spinner
  • Fuel tank:: 32oz rectangle
  • Control Horns: (4) 1.5", (2) 1"
  • Hinges: (28) DUBRO# 257 LG flat hinges
  • Covering: 1 oz fiberglass cloth & epoxy resin
  • Retracts Main
  • Retracts tail
  • Retract Air Kit: yes
  • Wheels Main: 5.5"
  • Wheels tail: 2"
  • Radio channels: 6 or more
  • Servos: Flaps (2) 150-200oz MGBB, Ailerons (2)90+oz BB, Elevators (2)90+oz BB, Rudder (1)120+oz BB, Gear (1)50oz, Throttles (1)50oz BB
             MG-metal gear BB-ball bearing