Ziroli Plans offers a full line of Giant scale warbird and civilian airplane plans, components, and accessories.
  • 30 days returns
     
  • Shipping Worldwide
    See all conditions
  • (631) 467-4765
    Call us Monday - Friday
Cart is empty

Taube Plan

Only 1000 left

45 $45.00

Product ID: ZIR:TAUBE1

  • Scale: 1.75" - 1'
  • Wingspan: 88"
  • Length: 62"
  • Wing Area: 1300 sq/in
  • Weight: 8-10lbs
  • Power: .90 GLOW (2C) 1.2 (4C)

The bird-like Taube was one of the earliest WWI combatants and was primarily used as an observation plat-form. The detailed plan set consists of four large sheets which clearly illustrate all structure as well as providing building hints.

Qty:

The giant scale Taube plan set is 1/6.9 scale and consists of four large sheets that clearly illustrate all structure. The Taube plan shows the installation of fixed wire gear, servos and OS .60 FS engine and features one piece wing.  The basic structures use conventional “modeling” tools and materials such as balsa and plywood, and the techniques are straightforward; easily accomplished by anyone with previous model building experience. There are many online building threads at www.rcuniverse.com forums and www.rcscalebuilder.com  forums for Nick’s plans. Tech support is also available via email at www.ziroliplans.com or by phone 9:00 to 5:00 Mon - Fri EST 631-467-4765. The plan includes full-size templates for all the required parts allowing you to cut a complete “kit” before you start construction. If you would like to purchase a wood kit see KIT CUTTER'S on selection bar at the top of each page. The plans have instructions and building notes on the plans. If you choose an engine not shown on the plans you should have it on hand when you start construction to make any changes needed for mounting. Nick Ziroli Plans recommends covering the airframe with an iron on cloth covering such as Solartex. Nick Ziroli Plans has building and scale accessories available for the Taube. 

Plans Specifications:
  • Specifications: Taube(Dove) Plan
  • Scale: 1/6.9
  • Inches to the foot: 1.75" - 1'
  • Length: 62"
  • Weight: 8-10lbs
  • Wing loading: 14-18oz/sqft
  • Wing area: 1300 sq.in
  • Wing span: 88"
  • Wing incidence at root: +2 degrees
  • Stab incidence: -1 degree
  • Dihedral: 3"-3.5" under tip
  • Power: .90 glow 2C, 1.2 glow 4C
  • Washout at wing tip: 2 to 3 degrees built in with jig
  • Elevator throws: 1" up and 1" down
  • Rudder throws: 1.5" to right & 1.5" to left
  • Engine offset degreese: 2 right 2 down
  • CG Location: at rear edge of wing spar
  • Requires:
  • Engine: .90 glow 2C, 1.2 glow 4C
  • Fuel tank:: 12oz square
  • Control Horns: (2) 3/4"
  • Hinges: (12) DUBRO# 257 LG flat hinges
  • Covering: cloth
  • Main gear struts: formed wire
  • Tail gear strut: formed wire
  • Wheels Main: 5"
  • Radio channels: 3
  • Servos: Flaps n/a, Ailerons n/a, Elevators (1)60+oz BB, Rudder (1)60+oz BB, Gear n/a, Throttles (1)50oz BB
             MG-metal gear BB-ball bearing